pidgin/pidgin
Clone
Summary
Browse
Changes
Graph
Don't emit changed signal when a webview is insensitive.
2012-06-08, Elliott Sales de Andrade
4114ce42d094
Don't emit changed signal when a webview is insensitive.
Apparently, this is what happens with a GtkTextView, so that we can
do programmatic changes without the signal.
dnl
Added
by
setup
-
gettext
.
Do
not
remove
this
dnl
unless
you
know
what
you
are
doing
.
AC_DEFUN
(
[
AM_GNU_GETTEXT_VERSION
]
,
[]
)
#
Configure
paths
for
GLIB
#
Owen
Taylor
1997
-
2001
dnl
AM_PATH_GLIB_2_0
(
[
MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES
]
]]]
)
dnl
Test
for
GLIB
,
and
define
GLIB_CFLAGS
and
GLIB_LIBS
,
if
gmodule
,
gobject
or
dnl
gthread
is
specified
in
MODULES
,
pass
to
pkg
-
config
dnl
AC_DEFUN
(
[
AM_PATH_GLIB_2_0
]
,
[
dnl
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(glibtest, [ --disable-glibtest do not try to compile and run a test GLIB program
]
,
,
enable_glibtest
=
yes
)
pkg_config_args
=
glib
-
2.0
for
module
in
.
$
4
do
case
"$module"
in
gmodule
)
pkg_config_args
=
"$pkg_config_args gmodule-2.0"
;;
gobject
)
pkg_config_args
=
"$pkg_config_args gobject-2.0"
;;
gthread
)
pkg_config_args
=
"$pkg_config_args gthread-2.0"
;;
esac
done
AC_PATH_PROG
(
PKG_CONFIG
,
pkg
-
config
,
no
)
no_glib
=
""
if
test
x
$
PKG_CONFIG
!=
xno
;
then
if
$
PKG_CONFIG
--
atleast
-
pkgconfig
-
version
0.7
;
then
:
else
echo
***
pkg
-
config
too
old
;
version
0.7
or
better
required
.
no_glib
=
yes
PKG_CONFIG
=
no
fi
else
no_glib
=
yes
fi
min_glib_version
=
ifelse
(
[
$1
]
,
,
2.0.0
,
$
1
)
AC_MSG_CHECKING
(
for
GLIB
-
version
>=
$
min_glib_version
)
if
test
x
$
PKG_CONFIG
!=
xno
;
then
##
don
't try to run the test against uninstalled libtool libs
if $PKG_CONFIG --uninstalled $pkg_config_args; then
echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
enable_glibtest=no
fi
if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
:
else
no_glib=yes
fi
fi
if test x"$no_glib" = x ; then
GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
sed '
s
/
\
(
[
[0-9
]
]
*
\
).
\
(
[
[0-9
]
]
*
\
).
\
(
[
[0-9
]
]
*
\
)
/
\
1
/
'`
glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
sed '
s
/
\
(
[
[0-9
]
]
*
\
).
\
(
[
[0-9
]
]
*
\
).
\
(
[
[0-9
]
]
*
\
)
/
\
2
/
'`
glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
sed '
s
/
\
(
[
[0-9
]
]
*
\
).
\
(
[
[0-9
]
]
*
\
).
\
(
[
[0-9
]
]
*
\
)
/
\
3
/
'`
if test "x$enable_glibtest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GLIB_CFLAGS"
LIBS="$GLIB_LIBS $LIBS"
dnl
dnl Now check if the installed GLIB is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
rm -f conf.glibtest
AC_TRY_RUN([
#include <glib.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.glibtest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("$min_glib_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string\n", "$min_glib_version");
exit(1);
}
if ((glib_major_version != $glib_config_major_version) ||
(glib_minor_version != $glib_config_minor_version) ||
(glib_micro_version != $glib_config_micro_version))
{
printf("\n*** '
pkg
-
config
--
modversion
glib
-
2.0
' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
$glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
glib_major_version, glib_minor_version, glib_micro_version);
printf ("*** was found! If pkg-config was correct, then it is best\n");
printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
printf("*** to point to the correct configuration files\n");
}
else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
(glib_minor_version != GLIB_MINOR_VERSION) ||
(glib_micro_version != GLIB_MICRO_VERSION))
{
printf("*** GLIB header files (version %d.%d.%d) do not match\n",
GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
glib_major_version, glib_minor_version, glib_micro_version);
}
else
{
if ((glib_major_version > major) ||
((glib_major_version == major) && (glib_minor_version > minor)) ||
((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
glib_major_version, glib_minor_version, glib_micro_version);
printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
major, minor, micro);
printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
printf("*** correct copy of pkg-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
return 1;
}
],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_glib" = x ; then
AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$PKG_CONFIG" = "no" ; then
echo "*** A new enough version of pkg-config was not found."
echo "*** See http://www.freedesktop.org/software/pkgconfig/"
else
if test -f conf.glibtest ; then
:
else
echo "*** Could not run GLIB test program, checking why..."
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GLIB_CFLAGS"
LIBS="$LIBS $GLIB_LIBS"
AC_TRY_LINK([
#include <glib.h>
#include <stdio.h>
], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GLIB or finding the wrong"
echo "*** version of GLIB. If it is not finding GLIB, you'
ll
need
to
set
your
"
echo "
***
LD_LIBRARY_PATH
environment
variable
,
or
edit
/
etc
/
ld
.
so
.
conf
to
point
"
echo "
***
to
the
installed
location
Also
,
make
sure
you
have
run
ldconfig
if
that
"
echo "
***
is
required
on
your
system
"
echo "
***
"
echo "
***
If
you
have
an
old
version
installed
,
it
is
best
to
remove
it
,
although
"
echo "
***
you
may
also
be
able
to
get
things
to
work
by
modifying
LD_LIBRARY_PATH
" ],
[ echo "
***
The
test
program
failed
to
compile
or
link
.
See
the
file
config
.
log
for
the
"
echo "
***
exact
error
that
occurred
.
This
usually
means
GLIB
is
incorrectly
installed
.
"])
CFLAGS="
$
ac_save_CFLAGS
"
LIBS="
$
ac_save_LIBS
"
fi
fi
GLIB_CFLAGS=""
GLIB_LIBS=""
GLIB_GENMARSHAL=""
GOBJECT_QUERY=""
GLIB_MKENUMS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(GLIB_CFLAGS)
AC_SUBST(GLIB_LIBS)
AC_SUBST(GLIB_GENMARSHAL)
AC_SUBST(GOBJECT_QUERY)
AC_SUBST(GLIB_MKENUMS)
rm -f conf.glibtest
])
# Configure paths for GTK+
# Owen Taylor 1997-2001
dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES,
dnl pass to pkg-config
dnl
AC_DEFUN([AM_PATH_GTK_2_0],
[dnl
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program],
, enable_gtktest=yes)
pkg_config_args=gtk+-2.0
for module in . $4
do
case "
$
module
" in
gthread)
pkg_config_args="
$
pkg_config_args
gthread
-
2.0
"
;;
esac
done
no_gtk=""
AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
if test x$PKG_CONFIG != xno ; then
if pkg-config --atleast-pkgconfig-version 0.7 ; then
:
else
echo *** pkg-config too old; version 0.7 or better required.
no_gtk=yes
PKG_CONFIG=no
fi
else
no_gtk=yes
fi
min_gtk_version=ifelse([$1], ,2.0.0,$1)
AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version)
if test x$PKG_CONFIG != xno ; then
## don't try to run the test against uninstalled libtool libs
if $PKG_CONFIG --uninstalled $pkg_config_args; then
echo "
Will
use
uninstalled
version
of
GTK
+
found
in
PKG_CONFIG_PATH
"
enable_gtktest=no
fi
if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
:
else
no_gtk=yes
fi
fi
if test x"
$
no_gtk
" = x ; then
GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "
x
$
enable_gtktest
" = "
xyes
" ; then
ac_save_CFLAGS="
$
CFLAGS
"
ac_save_LIBS="
$
LIBS
"
CFLAGS="
$
CFLAGS
$
GTK_CFLAGS
"
LIBS="
$
GTK_LIBS
$
LIBS
"
dnl
dnl Now check if the installed GTK+ is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
rm -f conf.gtktest
AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("
touch
conf
.
gtktest
");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("
$
min_gtk_version
");
if (sscanf(tmp_version, "
%
d
.
%
d
.
%
d
", &major, &minor, µ) != 3) {
printf("
%
s
,
bad
version
string
\
n
", "
$
min_gtk_version
");
exit(1);
}
if ((gtk_major_version != $gtk_config_major_version) ||
(gtk_minor_version != $gtk_config_minor_version) ||
(gtk_micro_version != $gtk_config_micro_version))
{
printf("
\
n
***
'pkg-config --modversion gtk+-2.0'
returned
%
d
.
%
d
.
%
d
,
but
GTK
+
(
%
d
.
%
d
.
%
d
)
\
n
",
$gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf ("
***
was
found
!
If
pkg
-
config
was
correct
,
then
it
is
best
\
n
");
printf ("
***
to
remove
the
old
version
of
GTK
+
.
You
may
also
be
able
to
fix
the
error
\
n
");
printf("
***
by
modifying
your
LD_LIBRARY_PATH
enviroment
variable
,
or
by
editing
\
n
");
printf("
***
/
etc
/
ld
.
so
.
conf
.
Make
sure
you
have
run
ldconfig
if
that
is
\
n
");
printf("
***
required
on
your
system
.
\
n
");
printf("
***
If
pkg
-
config
was
wrong
,
set
the
environment
variable
PKG_CONFIG_PATH
\
n
");
printf("
***
to
point
to
the
correct
configuration
files
\
n
");
}
else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
(gtk_minor_version != GTK_MINOR_VERSION) ||
(gtk_micro_version != GTK_MICRO_VERSION))
{
printf("
***
GTK
+
header
files
(
version
%
d
.
%
d
.
%
d
)
do
not
match
\
n
",
GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
printf("
***
library
(
version
%
d
.
%
d
.
%
d
)
\
n
",
gtk_major_version, gtk_minor_version, gtk_micro_version);
}
else
{
if ((gtk_major_version > major) ||
((gtk_major_version == major) && (gtk_minor_version > minor)) ||
((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
{
return 0;
}
else
{
printf("
\
n
***
An
old
version
of
GTK
+
(
%
d
.
%
d
.
%
d
)
was
found
.
\
n
",
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf("
***
You
need
a
version
of
GTK
+
newer
than
%
d
.
%
d
.
%
d
.
The
latest
version
of
\
n
",
major, minor, micro);
printf("
***
GTK
+
is
always
available
from
ftp
:
//
ftp
.
gtk
.
org
.
\
n
");
printf("
***
\
n
");
printf("
***
If
you
have
already
installed
a
sufficiently
new
version
,
this
error
\
n
");
printf("
***
probably
means
that
the
wrong
copy
of
the
pkg
-
config
shell
script
is
\
n
");
printf("
***
being
found
.
The
easiest
way
to
fix
this
is
to
remove
the
old
version
\
n
");
printf("
***
of
GTK
+
,
but
you
can
also
set
the
PKG_CONFIG
environment
to
point
to
the
\
n
");
printf("
***
correct
copy
of
pkg
-
config
.
(
In
this
case
,
you
will
have
to
\
n
");
printf("
***
modify
your
LD_LIBRARY_PATH
enviroment
variable
,
or
edit
/
etc
/
ld
.
so
.
conf
\
n
");
printf("
***
so
that
the
correct
libraries
are
found
at
run
-
time
))
\
n
");
}
}
return 1;
}
],, no_gtk=yes,[echo $ac_n "
cross
compiling
;
assumed
OK
...
$
ac_c
"])
CFLAGS="
$
ac_save_CFLAGS
"
LIBS="
$
ac_save_LIBS
"
fi
fi
if test "
x
$
no_gtk
" = x ; then
AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "
$
PKG_CONFIG
" = "
no
" ; then
echo "
***
A
new
enough
version
of
pkg
-
config
was
not
found
.
"
echo "
***
See
http
:
//
pkgconfig
.
sourceforge
.
net
"
else
if test -f conf.gtktest ; then
:
else
echo "
***
Could
not
run
GTK
+
test
program
,
checking
why
...
"
ac_save_CFLAGS="
$
CFLAGS
"
ac_save_LIBS="
$
LIBS
"
CFLAGS="
$
CFLAGS
$
GTK_CFLAGS
"
LIBS="
$
LIBS
$
GTK_LIBS
"
AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
[ echo "
***
The
test
program
compiled
,
but
did
not
run
.
This
usually
means
"
echo "
***
that
the
run
-
time
linker
is
not
finding
GTK
+
or
finding
the
wrong
"
echo "
***
version
of
GTK
+
.
If
it
is
not
finding
GTK
+
,
you
'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occurred. This usually means GTK+ is incorrectly installed."])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
GTK_CFLAGS=""
GTK_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)
rm -f conf.gtktest
])
dnl ac_var_timeszone_externals.m4
# Define '
timezone
', '
altzone
' and '
daylight
'
# http://www.gnu.org/software/ac-archive/Miscellaneous/ac_var_timezone_externals.html
# Use instead of '
AC_STRUCT_TIMEZONE
' to determine whether the
# the external timezone variables '
timezone
', '
altzone
' and '
daylight
' exist,
# defining '
HAVE_TIMEZONE
', '
HAVE_ALTZONE
' and '
HAVE_DAYLIGHT
' respectively
# (as well as gaining the macros defined by '
AC_STRUCT_TIMEZONE
').
# Mark R.Bannister <markb@freedomware.co.uk>
AC_DEFUN([AC_VAR_TIMEZONE_EXTERNALS],
[ AC_REQUIRE([AC_STRUCT_TIMEZONE])dnl
AC_CACHE_CHECK(for timezone external, mb_cv_var_timezone,
[ AC_TRY_LINK([#include <time.h>], [return (int)timezone;],
mb_cv_var_timezone=yes,
mb_cv_var_timezone=no)
])
AC_CACHE_CHECK(for altzone external, mb_cv_var_altzone,
[ AC_TRY_LINK([#include <time.h>], [return (int)altzone;],
mb_cv_var_altzone=yes,
mb_cv_var_altzone=no)
])
AC_CACHE_CHECK(for daylight external, mb_cv_var_daylight,
[ AC_TRY_LINK([#include <time.h>], [return (int)daylight;],
mb_cv_var_daylight=yes,
mb_cv_var_daylight=no)
])
if test $mb_cv_var_timezone = yes; then
AC_DEFINE([HAVE_TIMEZONE], 1,
[Define if you have the external '
timezone
' variable.])
fi
if test $mb_cv_var_altzone = yes; then
AC_DEFINE([HAVE_ALTZONE], 1,
[Define if you have the external '
altzone
' variable.])
fi
if test $mb_cv_var_daylight = yes; then
AC_DEFINE([HAVE_DAYLIGHT], 1,
[Define if you have the external '
daylight
' variable.])
fi
])
dnl Available from the GNU Autoconf Macro Archive at:
dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_prog_perl_modules.html
dnl
AC_DEFUN([AC_PROG_PERL_MODULES],[dnl
ac_perl_modules="$1"
# Make sure we have perl
if test -z "$PERL"; then
AC_CHECK_PROG(PERL,perl,perl)
fi
if test "x$PERL" != x; then
ac_perl_modules_failed=0
for ac_perl_module in $ac_perl_modules; do
AC_MSG_CHECKING(for perl module $ac_perl_module)
# Would be nice to log result here, but can'
t
rely
on
autoconf
internals
$
PERL
"-M$ac_perl_module"
-
e
exit
>
/
dev
/
null
2
>&
1
if
test
$
?
-
ne
0
;
then
AC_MSG_RESULT
(
no
);
ac_perl_modules_failed
=
1
else
AC_MSG_RESULT
(
ok
);
fi
done
#
Run
optional
shell
commands
if
test
"$ac_perl_modules_failed"
=
0
;
then
:
$
2
else
:
$
3
fi
else
AC_MSG_WARN
(
could
not
find
perl
)
fi
]
)
dnl
dnl
AM_GCONF_SOURCE_2
dnl
Defines
GCONF_SCHEMA_CONFIG_SOURCE
which
is
where
you
should
install
schemas
dnl
(
i
.
e
.
pass
to
gconftool
-
2
dnl
Defines
GCONF_SCHEMA_FILE_DIR
which
is
a
filesystem
directory
where
dnl
you
should
install
foo
.
schemas
files
dnl
AC_DEFUN
(
[
AM_GCONF_SOURCE_2
]
,
[
if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then
GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source`
else
GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE
fi
AC_ARG_WITH(gconf-source,
[ --with-gconf-source=sourceaddress Config database for installing schema files.
]
,
GCONF_SCHEMA_CONFIG_SOURCE
=
"$withval"
,)
AC_SUBST
(
GCONF_SCHEMA_CONFIG_SOURCE
)
AC_MSG_RESULT
(
[
Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation
]
)
if
test
"x$GCONF_SCHEMA_FILE_DIR"
=
"x"
;
then
GCONF_SCHEMA_FILE_DIR
=
'$(sysconfdir)/gconf/schemas'
fi
AC_ARG_WITH
(
gconf
-
schema
-
file
-
dir
,
[
--with-gconf-schema-file-dir=dir Directory for installing schema files.
]
,
GCONF_SCHEMA_FILE_DIR
=
"$withval"
,)
AC_SUBST
(
GCONF_SCHEMA_FILE_DIR
)
AC_MSG_RESULT
(
[
Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files
]
)
AC_ARG_ENABLE
(
schemas
-
install
,
[
--disable-schemas-install Disable the schemas installation
]
,
[
case ${enableval} in
yes|no) ;;
*) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;;
esac
]
)
AM_CONDITIONAL
(
[
GCONF_SCHEMAS_INSTALL
]
,
[
test "$enable_schemas_install" != no
]
)
]
)