gaim/gaim

This is a temporary fix for the rate limit problems.
oldstatus
2005-10-15, Mark Doliner
649cffd7a416
This is a temporary fix for the rate limit problems.

Cause: Gaim uses the SNAC 0x0004/0x0015 to fetch the away message
of each user in your buddy list. Previously this SNAC was in a
"rate class" that had an extremely lenient rate limit. Gaim would
fetch a new away message at most every 1.3 seconds. AOL recently
moved this SNAC to be in the same rate class as most of the other
SNACs (send IM, add buddy, connect to chat room, etc.) My temporary
fix is to bump this delay to 10 seconds.

We copied this functionality from iChat, and it looks like they
might actually be having the same problem (but I didn't even take
a packet capture to verify). If this is the case, AOL is really
stupid.

Possibly better fixes:
* Use the rate information to delay packets so that we never hit
a rate limit
* There may be a different SNAC that is now more leniently rate
limited. Possibly 0x0002/0x0005 or 0x0004/0x0006.
dnl Added by setup-gettext. Do not remove this
dnl unless you know what you are doing.
AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
# Configure paths for GLIB
# Owen Taylor 1997-2001
dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject or
dnl gthread is specified in MODULES, pass to pkg-config
dnl
AC_DEFUN([AM_PATH_GLIB_2_0],
[dnl
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(glibtest, [ --disable-glibtest do not try to compile and run a test GLIB program],
, enable_glibtest=yes)
pkg_config_args=glib-2.0
for module in . $4
do
case "$module" in
gmodule)
pkg_config_args="$pkg_config_args gmodule-2.0"
;;
gobject)
pkg_config_args="$pkg_config_args gobject-2.0"
;;
gthread)
pkg_config_args="$pkg_config_args gthread-2.0"
;;
esac
done
AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
no_glib=""
if test x$PKG_CONFIG != xno ; then
if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then
:
else
echo *** pkg-config too old; version 0.7 or better required.
no_glib=yes
PKG_CONFIG=no
fi
else
no_glib=yes
fi
min_glib_version=ifelse([$1], ,2.0.0,$1)
AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
if test x$PKG_CONFIG != xno ; then
## don't try to run the test against uninstalled libtool libs
if $PKG_CONFIG --uninstalled $pkg_config_args; then
echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
enable_glibtest=no
fi
if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
:
else
no_glib=yes
fi
fi
if test x"$no_glib" = x ; then
GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_glibtest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GLIB_CFLAGS"
LIBS="$GLIB_LIBS $LIBS"
dnl
dnl Now check if the installed GLIB is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
rm -f conf.glibtest
AC_TRY_RUN([
#include <glib.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.glibtest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("$min_glib_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
printf("%s, bad version string\n", "$min_glib_version");
exit(1);
}
if ((glib_major_version != $glib_config_major_version) ||
(glib_minor_version != $glib_config_minor_version) ||
(glib_micro_version != $glib_config_micro_version))
{
printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
$glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
glib_major_version, glib_minor_version, glib_micro_version);
printf ("*** was found! If pkg-config was correct, then it is best\n");
printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
printf("*** to point to the correct configuration files\n");
}
else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
(glib_minor_version != GLIB_MINOR_VERSION) ||
(glib_micro_version != GLIB_MICRO_VERSION))
{
printf("*** GLIB header files (version %d.%d.%d) do not match\n",
GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
glib_major_version, glib_minor_version, glib_micro_version);
}
else
{
if ((glib_major_version > major) ||
((glib_major_version == major) && (glib_minor_version > minor)) ||
((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
glib_major_version, glib_minor_version, glib_micro_version);
printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
major, minor, micro);
printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
printf("*** correct copy of pkg-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
return 1;
}
],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_glib" = x ; then
AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version))
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$PKG_CONFIG" = "no" ; then
echo "*** A new enough version of pkg-config was not found."
echo "*** See http://www.freedesktop.org/software/pkgconfig/"
else
if test -f conf.glibtest ; then
:
else
echo "*** Could not run GLIB test program, checking why..."
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GLIB_CFLAGS"
LIBS="$LIBS $GLIB_LIBS"
AC_TRY_LINK([
#include <glib.h>
#include <stdio.h>
], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GLIB or finding the wrong"
echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occurred. This usually means GLIB is incorrectly installed."])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
GLIB_CFLAGS=""
GLIB_LIBS=""
GLIB_GENMARSHAL=""
GOBJECT_QUERY=""
GLIB_MKENUMS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(GLIB_CFLAGS)
AC_SUBST(GLIB_LIBS)
AC_SUBST(GLIB_GENMARSHAL)
AC_SUBST(GOBJECT_QUERY)
AC_SUBST(GLIB_MKENUMS)
rm -f conf.glibtest
])
# Configure paths for GTK+
# Owen Taylor 1997-2001
dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES,
dnl pass to pkg-config
dnl
AC_DEFUN([AM_PATH_GTK_2_0],
[dnl
dnl Get the cflags and libraries from pkg-config
dnl
AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program],
, enable_gtktest=yes)
pkg_config_args=gtk+-2.0
for module in . $4
do
case "$module" in
gthread)
pkg_config_args="$pkg_config_args gthread-2.0"
;;
esac
done
no_gtk=""
AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
if test x$PKG_CONFIG != xno ; then
if pkg-config --atleast-pkgconfig-version 0.7 ; then
:
else
echo *** pkg-config too old; version 0.7 or better required.
no_gtk=yes
PKG_CONFIG=no
fi
else
no_gtk=yes
fi
min_gtk_version=ifelse([$1], ,2.0.0,$1)
AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version)
if test x$PKG_CONFIG != xno ; then
## don't try to run the test against uninstalled libtool libs
if $PKG_CONFIG --uninstalled $pkg_config_args; then
echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH"
enable_gtktest=no
fi
if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
:
else
no_gtk=yes
fi
fi
if test x"$no_gtk" = x ; then
GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_gtktest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$GTK_LIBS $LIBS"
dnl
dnl Now check if the installed GTK+ is sufficiently new. (Also sanity
dnl checks the results of pkg-config to some extent)
dnl
rm -f conf.gtktest
AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.gtktest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("$min_gtk_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
printf("%s, bad version string\n", "$min_gtk_version");
exit(1);
}
if ((gtk_major_version != $gtk_config_major_version) ||
(gtk_minor_version != $gtk_config_minor_version) ||
(gtk_micro_version != $gtk_config_micro_version))
{
printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
$gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf ("*** was found! If pkg-config was correct, then it is best\n");
printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
printf("*** to point to the correct configuration files\n");
}
else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
(gtk_minor_version != GTK_MINOR_VERSION) ||
(gtk_micro_version != GTK_MICRO_VERSION))
{
printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
}
else
{
if ((gtk_major_version > major) ||
((gtk_major_version == major) && (gtk_minor_version > minor)) ||
((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
major, minor, micro);
printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
printf("*** correct copy of pkg-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
return 1;
}
],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_gtk" = x ; then
AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version))
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$PKG_CONFIG" = "no" ; then
echo "*** A new enough version of pkg-config was not found."
echo "*** See http://pkgconfig.sourceforge.net"
else
if test -f conf.gtktest ; then
:
else
echo "*** Could not run GTK+ test program, checking why..."
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occurred. This usually means GTK+ is incorrectly installed."])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
GTK_CFLAGS=""
GTK_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)
rm -f conf.gtktest
])
dnl This is XIPH_PATH_AO renamed to GAIM_PATH_AO to prevent conflicts.
dnl It's a long story. --elb
# ao.m4
# Configure paths for libao
# Jack Moffitt <jack@icecast.org> 10-21-2000
# Shamelessly stolen from Owen Taylor and Manish Singh
dnl GAIM_PATH_AO([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
dnl Test for libao, and define AO_CFLAGS and AO_LIBS
dnl
AC_DEFUN([GAIM_PATH_AO],
[dnl
dnl Get the cflags and libraries
dnl
AC_ARG_WITH(ao,[ --with-ao=PFX Prefix where libao is installed (optional)], ao_prefix="$withval", ao_prefix="")
AC_ARG_WITH(ao-libraries,[ --with-ao-libraries=DIR Directory where libao library is installed (optional)], ao_libraries="$withval", ao_libraries="")
AC_ARG_WITH(ao-includes,[ --with-ao-includes=DIR Directory where libao header files are installed (optional)], ao_includes="$withval", ao_includes="")
AC_ARG_ENABLE(aotest, [ --disable-aotest Do not try to compile and run a test ao program],, enable_aotest=yes)
if test "x$ao_libraries" != "x" ; then
AO_LIBS="-L$ao_libraries"
elif test "x$ao_prefix" != "x"; then
AO_LIBS="-L$ao_prefix/lib"
elif test "x$prefix" != "xNONE"; then
AO_LIBS="-L$prefix/lib"
fi
if test "x$ao_includes" != "x" ; then
AO_CFLAGS="-I$ao_includes"
elif test "x$ao_prefix" != "x"; then
AO_CFLAGS="-I$ao_prefix/include"
elif test "x$prefix" != "xNONE"; then
AO_CFLAGS="-I$prefix/include"
fi
# see where dl* and friends live
AC_CHECK_FUNCS(dlopen, [AO_DL_LIBS=""], [
AC_CHECK_LIB(dl, dlopen, [AO_DL_LIBS="-ldl"], [
AC_MSG_WARN([could not find dlopen() needed by libao sound drivers
your system may not be supported.])
])
])
AO_LIBS="$AO_LIBS -lao $AO_DL_LIBS"
AC_MSG_CHECKING(for ao)
no_ao=""
if test "x$enable_aotest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $AO_CFLAGS"
LIBS="$LIBS $AO_LIBS"
dnl
dnl Now check if the installed ao is sufficiently new.
dnl
rm -f conf.aotest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ao/ao.h>
int main ()
{
system("touch conf.aotest");
return 0;
}
],, no_ao=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
if test "x$no_ao" = "x" ; then
AC_MSG_RESULT(yes)
ifelse([$1], , :, [$1])
else
AC_MSG_RESULT(no)
if test -f conf.aotest ; then
:
else
echo "*** Could not run ao test program, checking why..."
CFLAGS="$CFLAGS $AO_CFLAGS"
LIBS="$LIBS $AO_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include <ao/ao.h>
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding ao or finding the wrong"
echo "*** version of ao. If it is not finding ao, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occurred. This usually means ao was incorrectly installed"
echo "*** or that you have moved ao since it was installed." ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
AO_CFLAGS=""
AO_LIBS=""
ifelse([$2], , :, [$2])
fi
AC_SUBST(AO_CFLAGS)
AC_SUBST(AO_LIBS)
rm -f conf.aotest
])
dnl audiofile.m4, included here for those people who don't have audiofile
dnl installed but would like to build CVS.
# Configure paths for the Audio File Library
# Bertrand Guiheneuf 98-10-21
# stolen from esd.m4 in esound :
# Manish Singh 98-9-30
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor
dnl AM_PATH_AUDIOFILE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for Audio File Library, and define AUDIOFILE_CFLAGS and AUDIOFILE_LIBS.
dnl
AC_DEFUN([AM_PATH_AUDIOFILE],
[dnl
dnl Get compiler flags and libraries from the audiofile-config script.
dnl
AC_ARG_WITH(audiofile-prefix,[ --with-audiofile-prefix=PFX Prefix where Audio File Library is installed (optional)],
audiofile_prefix="$withval", audiofile_prefix="")
AC_ARG_WITH(audiofile-exec-prefix,[ --with-audiofile-exec-prefix=PFX Exec prefix where Audio File Library is installed (optional)],
audiofile_exec_prefix="$withval", audiofile_exec_prefix="")
AC_ARG_ENABLE(audiofiletest, [ --disable-audiofiletest Do not try to compile and run a test Audio File Library program], , enable_audiofiletest=yes)
if test x$audiofile_exec_prefix != x ; then
audiofile_args="$audiofile_args --exec-prefix=$audiofile_exec_prefix"
if test x${AUDIOFILE_CONFIG+set} != xset ; then
AUDIOFILE_CONFIG=$audiofile_exec_prefix/bin/audiofile-config
fi
fi
if test x$audiofile_prefix != x ; then
audiofile_args="$audiofile_args --prefix=$audiofile_prefix"
if test x${AUDIOFILE_CONFIG+set} != xset ; then
AUDIOFILE_CONFIG=$audiofile_prefix/bin/audiofile-config
fi
fi
AC_PATH_PROG(AUDIOFILE_CONFIG, audiofile-config, no)
min_audiofile_version=ifelse([$1], ,0.2.5,$1)
AC_MSG_CHECKING(for Audio File Library - version >= $min_audiofile_version)
no_audiofile=""
if test "$AUDIOFILE_CONFIG" = "no" ; then
no_audiofile=yes
else
AUDIOFILE_LIBS=`$AUDIOFILE_CONFIG $audiofileconf_args --libs`
AUDIOFILE_CFLAGS=`$AUDIOFILE_CONFIG $audiofileconf_args --cflags`
audiofile_major_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
audiofile_minor_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
audiofile_micro_version=`$AUDIOFILE_CONFIG $audiofile_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_audiofiletest" = "xyes" ; then
AC_LANG_SAVE
AC_LANG_C
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS"
LIBS="$LIBS $AUDIOFILE_LIBS"
dnl
dnl Now check if the installed Audio File Library is sufficiently new.
dnl (Also checks the sanity of the results of audiofile-config to some extent.)
dnl
rm -f conf.audiofiletest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <audiofile.h>
char*
my_strdup (char *str)
{
char *new_str;
if (str)
{
new_str = malloc ((strlen (str) + 1) * sizeof(char));
strcpy (new_str, str);
}
else
new_str = NULL;
return new_str;
}
int main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.audiofiletest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = my_strdup("$min_audiofile_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
printf("%s, bad version string\n", "$min_audiofile_version");
exit(1);
}
if (($audiofile_major_version > major) ||
(($audiofile_major_version == major) && ($audiofile_minor_version > minor)) ||
(($audiofile_major_version == major) && ($audiofile_minor_version == minor) && ($audiofile_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** 'audiofile-config --version' returned %d.%d.%d, but the minimum version\n", $audiofile_major_version, $audiofile_minor_version, $audiofile_micro_version);
printf("*** of the Audio File Library required is %d.%d.%d. If audiofile-config is correct, then it is\n", major, minor, micro);
printf("*** best to upgrade to the required version.\n");
printf("*** If audiofile-config was wrong, set the environment variable AUDIOFILE_CONFIG\n");
printf("*** to point to the correct copy of audiofile-config, and remove the file\n");
printf("*** config.cache before re-running configure\n");
return 1;
}
}
],, no_audiofile=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
AC_LANG_RESTORE
fi
fi
if test "x$no_audiofile" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$AUDIOFILE_CONFIG" = "no" ; then
cat <<END
*** The audiofile-config script installed by the Audio File Library could
*** not be found. If the Audio File Library was installed in PREFIX, make
*** sure PREFIX/bin is in your path, or set the AUDIOFILE_CONFIG
*** environment variable to the full path to audiofile-config.
END
else
if test -f conf.audiofiletest ; then
:
else
echo "*** Could not run Audio File Library test program; checking why..."
AC_LANG_SAVE
AC_LANG_C
CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS"
LIBS="$LIBS $AUDIOFILE_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include <audiofile.h>
], [ return 0; ],
[ cat <<END
*** The test program compiled, but did not run. This usually means that
*** the run-time linker is not finding Audio File Library or finding the
*** wrong version of Audio File Library.
***
*** If it is not finding Audio File Library, you'll need to set your
*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point
*** to the installed location. Also, make sure you have run ldconfig if
*** that is required on your system.
***
*** If you have an old version installed, it is best to remove it, although
*** you may also be able to get things to work by modifying
*** LD_LIBRARY_PATH.
END
],
[ echo "*** The test program failed to compile or link. See the file config.log"
echo "*** for the exact error that occurred. This usually means the Audio File"
echo "*** Library was incorrectly installed or that you have moved the Audio"
echo "*** File Library since it was installed. In the latter case, you may want"
echo "*** to edit the audiofile-config script: $AUDIOFILE_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
AC_LANG_RESTORE
fi
fi
AUDIOFILE_CFLAGS=""
AUDIOFILE_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(AUDIOFILE_CFLAGS)
AC_SUBST(AUDIOFILE_LIBS)
rm -f conf.audiofiletest
])
dnl ac_var_timeszone_externals.m4
# Define 'timezone', 'altzone' and 'daylight'
# http://www.gnu.org/software/ac-archive/Miscellaneous/ac_var_timezone_externals.html
# Use instead of 'AC_STRUCT_TIMEZONE' to determine whether the
# the external timezone variables 'timezone', 'altzone' and 'daylight' exist,
# defining 'HAVE_TIMEZONE', 'HAVE_ALTZONE' and 'HAVE_DAYLIGHT' respectively
# (as well as gaining the macros defined by 'AC_STRUCT_TIMEZONE').
# Mark R.Bannister <markb@freedomware.co.uk>
AC_DEFUN([AC_VAR_TIMEZONE_EXTERNALS],
[ AC_REQUIRE([AC_STRUCT_TIMEZONE])dnl
AC_CACHE_CHECK(for timezone external, mb_cv_var_timezone,
[ AC_TRY_LINK([#include <time.h>], [return (int)timezone;],
mb_cv_var_timezone=yes,
mb_cv_var_timezone=no)
])
AC_CACHE_CHECK(for altzone external, mb_cv_var_altzone,
[ AC_TRY_LINK([#include <time.h>], [return (int)altzone;],
mb_cv_var_altzone=yes,
mb_cv_var_altzone=no)
])
AC_CACHE_CHECK(for daylight external, mb_cv_var_daylight,
[ AC_TRY_LINK([#include <time.h>], [return (int)daylight;],
mb_cv_var_daylight=yes,
mb_cv_var_daylight=no)
])
if test $mb_cv_var_timezone = yes; then
AC_DEFINE([HAVE_TIMEZONE], 1,
[Define if you have the external 'timezone' variable.])
fi
if test $mb_cv_var_altzone = yes; then
AC_DEFINE([HAVE_ALTZONE], 1,
[Define if you have the external 'altzone' variable.])
fi
if test $mb_cv_var_daylight = yes; then
AC_DEFINE([HAVE_DAYLIGHT], 1,
[Define if you have the external 'daylight' variable.])
fi
])
dnl Available from the GNU Autoconf Macro Archive at:
dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_prog_perl_modules.html
dnl
AC_DEFUN([AC_PROG_PERL_MODULES],[dnl
ac_perl_modules="$1"
# Make sure we have perl
if test -z "$PERL"; then
AC_CHECK_PROG(PERL,perl,perl)
fi
if test "x$PERL" != x; then
ac_perl_modules_failed=0
for ac_perl_module in $ac_perl_modules; do
AC_MSG_CHECKING(for perl module $ac_perl_module)
# Would be nice to log result here, but can't rely on autoconf internals
$PERL "-M$ac_perl_module" -e exit > /dev/null 2>&1
if test $? -ne 0; then
AC_MSG_RESULT(no);
ac_perl_modules_failed=1
else
AC_MSG_RESULT(ok);
fi
done
# Run optional shell commands
if test "$ac_perl_modules_failed" = 0; then
:
$2
else
:
$3
fi
else
AC_MSG_WARN(could not find perl)
fi])dnl
dnl This file scares me...
# Check for binary relocation support
# Hongli Lai
# http://autopackage.org/
AC_DEFUN([AM_BINRELOC],
[
AC_ARG_ENABLE(binreloc,
[ --enable-binreloc compile with binary relocation support
(default=enable when available)],
enable_binreloc=$enableval,enable_binreloc=auto)
BINRELOC_CFLAGS=
BINRELOC_LIBS=
if test "x$enable_binreloc" = "xauto"; then
AC_CACHE_CHECK([whether everything is installed to the same prefix],
[br_cv_valid_prefixes], [
if test "$bindir" = '${exec_prefix}/bin' -a "$sbindir" = '${exec_prefix}/sbin' -a \
"$datadir" = '${prefix}/share' -a "$libdir" = '${exec_prefix}/lib' -a \
"$libexecdir" = '${exec_prefix}/libexec' -a "$sysconfdir" = '${prefix}/etc'
then
br_cv_valid_prefixes=yes
else
br_cv_valid_prefixes=no
fi
])
fi
AC_CACHE_CHECK([whether binary relocation support should be enabled],
[br_cv_binreloc],
[if test "x$enable_binreloc" = "xyes"; then
br_cv_binreloc=yes
elif test "x$enable_binreloc" = "xauto"; then
if test "x$br_cv_valid_prefixes" = "xyes"; then
br_cv_binreloc=yes
else
br_cv_binreloc=no
fi
else
br_cv_binreloc=no
fi])
if test "x$br_cv_binreloc" = "xyes"; then
BINRELOC_CFLAGS="-DENABLE_BINRELOC"
AC_DEFINE(ENABLE_BINRELOC,,[Use binary relocation?])
fi
AC_SUBST(BINRELOC_CFLAGS)
AC_SUBST(BINRELOC_LIBS)
])